HP 3562A Service Manual page 79

O D E l 3562A
Table 2-1 1 Single Channel Phase Accuracy
Signal
Frequency
9 kHz
9 kHz
9 kHz
9 kHz
99 kHz
99 kHz
99 kHz
D. For each of the frequencies listed in table 2-1 1 perform steps 1 through 4:
1 . Set the freq uency Synthesizer as follows:
Frequency
2. Press the HP 3562A keys as fol lows:
SE LECT
TRIG
START
3 . Record the Ya marker read ing on the Performance Test Record for CHA N 1
x
measu red val ue, BNC shell grou nded.
4. Record the Yb marker read ing on the Performance Test Record for CHA N 2 .
measured value, BNC shell grounded.
E . Reverse one of the banana plug connectors so the center cond uctor of each chan­
nel's BNC is grou nded.
Trigger
Slope
pas
pas
pas
N E G
pas
pas
p a s
To signal freq uency in table
To trigger slope in table
To trigger type in table
To signal freq uency in table
P E R FORMANCE TEST
Trigger
Type
I N PUT CHAN 1
I N PUT CHAN 2
EXTE RNAL
EXTE RNAL
I N PUT CHAN 1
I N PUT CHAN 2
EXTERNAL
2-57