Draytek Vigor2860 User Manual page 899

Actual Data Rate:
SNR:
> wan vdsl fbk_mode vdsl_only
Set VDSL fallback mode to VDSL ONLY
Reboot system to take effect
>
T e l n e t C o m m
T e l n e t C o m m
This command allows you to configure LTE WAN (for L model only).
S y n t a x
S y n t a x
wan lte auth [0/1]
wan lte band
wan lte del [index #/all]
wan lte pass [string]
wan lte quota [-<command><parameter>l...]
wan lte read [index #/all]
wan lte reboot [-<command><parameter>l...]
wan lte reply [-<command><parameter>l...]
wan lte send [number][message]
wan lte stus
wan lte tag [index #/all]
wan lte user [string]
wan lte wms [send[cdma/gwpp]/recv[cdma/gwgw]/setting]
S y n t a x
S y n t a x
Parameter
auth [0/1]
band
del [index #/all]
pass
quota
[-<command><parameter>l...
]
Vigor2860 Series User's Guide
0 0 0.1dB
a n d : w a n l t e
a n d : w a n l t e
D e s c r i p t i o n
D e s c r i p t i o n
Description
Set PPP authentication of LTE WAN.
0: None.
1: PAP or CHAP.
Display working band information for LTE network connection.
Delete an SMS from the LTE SIM card by specifying the index
number. Use "all" to delete all.
Set the password of LTE WAN.
Set settings of SMS Quota Limit function.
Available commands with parameter are listed below:
[...] means that you can type in several commands in one line.
-a <0/1>: Set whether to send an e-mail alert when SMS quota
exceeded. (0: no 1: yes)
-c <cycle>: Set the order of today in refresh cycle.
-d <day>: Set the refresh day.
-e <0/1>: Enable or disable SMS Quota Limit function. (0: disable 1:
enable)
-h <hour>: Set the refresh hour.
-m <0/1/2>: Set SMS quota refresh mode. (0: None 1: monthly 2:
periodically)
0 0 Kb/s
885