Draytek Vigor2860 User Manual page 20

VPN
DoS
LED on Connector
WAN2
(Giga)
GigaLA
N 1~6
Interface
Wireless LAN
ON/OFF/WPS
6
On
Off
Blinking
On
Blinking
Left On
LED
Off
Blinking
Right On
LED
Off
Left On
LED
Off
Blinking
Right On
LED
Off
Switch on Rear Side
Description
For Vigor2860n /Vigor2860Ln:

Press the button and release it within 2 seconds. When the
wireless function is ready, the green LED will be on.

Press the button and release it within 2 seconds to turn off the
WLAN function. When the wireless function is not ready, the
within 2 minutes.)
The VPN tunnel is active.
VPN services are disabled.
Traffic is passing through VPN tunnel.
The DoS function is active.
It will blink while detecting an attack.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
(Available for Vigor2860Ln)
Vigor2860 Series User's Guide