Draytek Vigor2860 User Manual page 763

-i <ip address>
-w <ip address>
-n <netmask>
-g <gateway>
-V
-C <sim pin code>
-O <init string>
-T <init string2>
-D <dial string>
-v <service name>
-m <ppp username>
-o <ppp password>
-e n
-q n
-x n
-y n
-z n
-Q <mode>
-I <ping ip>
-L n
-E <sim pin code>
-G <mode>
-N <apn name>
-U n
E x a m p l
E x a m p
>internet -M 1 -S tcom -u username -p password -a 0 -t -1 -i 0.0.0.0
WAN1 Internet Mode set to PPPoE/PPPoA
Vigor2860 Series User's Guide
n=-1: Always-on
n=1 ~ 999: Idle time for offline (default 180 seconds)
It means that PPPoE server will assign an IP address specified here
for CPE (PPPoE client).
If you type 0.0.0.0 as the <ip address>, ISP will assign suitable IP
address for you. However, if you type an IP address here, the router
will use that one as a fixed IP.
It means to assign WAN IP address for such connection. Please type
an IP address here for WAN port.
It means to assign netmask for WAN connection. You have to type
255.255.255.xxx (x is changeable) as the netmask for WAN port.
It means to assign gateway IP for such WAN connection.
It means to view Internet Access profile.
Set (PPP mode) SIM PIN code (max. 15 characters).
Set (PPP mode) Modem Initial String (max. 47 characters).
Set (PPP mode) Modem Initial String2 (max. 47 characters)
Set (PPP mode) Modem Dial String (max. 31 characters).
Set (PPP mode) Service Name (max. 23 characters).
Set (PPP mode) PPP Username (max. 63 characters).
Set (PPP mode) PPP Password (max. 62 characters).
Set (PPP mode) PPP Authentication Type.
n= 0: PAP/CHAP (default),
1: PAP Only
(PPP mode) Index(1-15) in Schedule Setup-One
(PPP mode) Index(1-15) in Schedule Setup-Two
(PPP mode) Index(1-15) in Schedule Setup-Three
(PPP mode) Index(1-15) in Schedule Setup-Four
Set (PPP mode or DHCP mode) WAN Connection Detection Mode.
<mode>
0: ARP Detect;
1: Ping Detect
Set (PPP mode or DHCP mode) WAN Connection Detection Ping IP.
<ping ip>= ppp.qqq.rrr.sss: WAN Connection Detection Ping IP
Set (PPP mode) WAN Connection Detection TTL (1-255) value.
Set (DHCP mode) SIM PIN code (max. 19 characters).
Set (DHCP mode) Network Mode.
<mode>
0: 4G/3G/2G;
1: 4G Only;
2: 3G Only;
3: 2G Only
Set (DHCP mode) APN Name (max. 47 characters)
(DHCP mode) MTU(1000-1440)
e
l e
749