Draytek Vigor2860 User Manual page 708

Available settings are explained as follows:
Item
Enable
Refresh
Clear
Syslog Type
Display Mode
Time
Message
694
Description
Check the box to enable such function.
Click it to update current page.
Click it to remove all of the records.
Specify RADIUS, 802.1X or All to display related authentication
information log.
Choose the mode you want to display the related information
on the following table.
 Stop record when fulls – when the capacity of CVM log is
full, the system will stop recording.
Always record the new event – only the newest events

will be recorded by the system.
Display the time the user authenticated by Vigor2860 series.
Display authentication information done by Vigor2860 series.
Vigor2860 Series User's Guide