Draytek Vigor2860 User Manual page 189

If you previously have set up WAN Alias for PPPoE or Static or Dynamic IP mode in WAN2
interface, you will find them in Aux. WAN IP for your selection.
Available settings are explained as follows:
Item
Enable
Private IP
Choose PC
After finishing all the settings here, please click OK to save the configuration.
Vigor2860 Series User's Guide
Description
Check to enable the DMZ Host function.
Enter the private IP address of the DMZ host, or click Choose
PC to select one.
Click this button and then a window will automatically pop
up, as depicted below. The window consists of a list of
private IP addresses of all hosts in your LAN network. Select
one private IP address in the list to be the DMZ host.
When you have selected one private IP from the above
dialog, the IP address will be shown on the screen. Click OK
to save the setting.
175