Draytek Vigor2860 User Manual page 374

General Setup
360
Detailed information for this dialog, see later section -
Advanced Load Balance and Backup.
Status- After choosing one of the profile listed above, please
click Enable to activate this profile. If you click Disable, the
selected or current used VPN TRUNK-Backup/Load Balance
mechanism profile will not have any effect for VPN tunnel.
Profile Name- Type a name for VPN TRUNK profile. Each
profile can group two VPN connections set in LAN-to-LAN.
The saved VPN profiles in LAN-to-LAN will be shown on
Member1 and Member2 fields. The length of the name is
limited to 11 characters.
Member 1/Member2 - Display the selection for LAN-to-LAN
dial-out profiles (configured in VPN and Remote Access >>
LAN-to-LAN) for you to choose for grouping under certain
VPN TRUNK-VPN Backup/Load Balance mechanism profile.
No - Index number of LAN-to-LAN dial-out profile.

Name - Profile name of LAN-to-LAN dial-out profile.

Connection Type - Connection type of LAN-to-LAN

dial-out profile.
VPN ServerIP (Private Network) - VPN Server IP of

LAN-to-LAN dial-out profiles.
Active Mode - Display available mode for you to choose.
Choose Backup or Load Balance for your router.
Add - Add and save new profile to the backup profile list.
The corresponding members (LAN-to-LAN profiles) grouped
in such new VPN TRUNK – VPN Backup mechanism profile will
be locked. The profiles in LAN-to-LAN will be displayed in
red. VPN TRUNK – VPN Load Balance mechanism profile will
be locked. The profiles in LAN-to-LAN will be displayed in
blue.
Update - Click this button to save the changes to the Status
(Enable or Disable), profile name, member1 or member2.
Delete - Click this button to delete the selected VPN TRUNK
profile. The corresponding members (LAN-to-LAN profiles)
grouped in the deleted VPN TRUNK profile will be released
Vigor2860 Series User's Guide