Draytek Vigor2860 User Manual page 699

APP QoS
Current /Peak/Speed
Vigor2860 Series User's Guide
Unblock –The device with the IP address will be blocked for
five minutes. The remaining time will be shown on the
session column. Click it to cancel the IP address blocking.
Use the drop down list to change the priority in data
transmission for the specified IP address (host).
Current means current transmission rate and receiving rate
for WAN interface.
Peak means the highest peak value detected by the router in
data transmission.
Speed means line speed specified in WAN>>General Setup.
If you do not specify any rate at that page, here will display
Auto for instead.
685