Vii-1-7 Syslog/Mail Alert - Draytek Vigor2860 User Manual

V I I - 1 - 7 S
V I I - 1 - 7 S
SysLog function is provided for users to monitor router.
Available settings are explained as follows:
Item
SysLog Access Setup
Router Name
Mail Alert Setup
476
y s l o g / M a i l A l e r t
y s l o g / M a i l A l e r t
Description
Enable - Check Enable to activate function of syslog.
Syslog Save to – Check Syslog Server to save the log to Syslog
server.
Check USB Disk to save the log to the attached USB storage
disk.
Display the name for such router configured in System
Maintenance>>Management.
If there is no name here, simply lick the link to access into
System Maintenance>>Management to set the router name.
Server IP Address -The IP address of the Syslog server.
Destination Port - Assign a port for the Syslog protocol.
Mail Syslog – Check the box to recode the mail event on
Syslog.
Enable syslog message - Check the box listed on this web
page to send the corresponding message of firewall, VPN,
User Access, Call, WAN, Router/DSL information to Syslog.
Check Enable to activate function of mail alert.
Send a test e-mail - Make a simple test for the e-mail
address specified in this page. Please assign the mail address
first and click this button to execute a test for verify the mail
Vigor2860 Series User's Guide