Draytek Vigor2860 User Manual page 139

this Channel
WAN Setup
WAN Connection
Detection
Vigor2860 Series User's Guide
applied to this channel to create a virtual WAN. The virtual
WAN carries the same number as the channel itself.
WAN Application –The intended usage of this channel.
Management –The router can be managed using the

web-based configuration, telnet and TR-069 via this
channel.
 IPTV - IGMP packets can be sent to IPTV servers on this
channel.
It is available only when VDSL or Ethernet (WAN2) is
selected as WAN Type. Choose PPPoE/PPPoA Client or
Static or Dynamic IP as the WAN mode for such channel.

When PPPoE/PPPoA is selected, the ISP Access Setup and
IP Address from ISP settings are available for
configuration, and will be used to establish the WAN
connection.
ISP Name – Type in the name of your ISP.
Username – Type in the username provided by ISP in this
field. The maximum length of the name you can set is 80
characters.
Password – Type in the password provided by ISP in this
field. The maximum length of the password you can set is
48 characters.
PPP Authentication – Select PAP only or PAP or CHAP for
PPP.
Always On – Check it to keep the network

connection always.
Idle Timeout – Set the timeout for breaking down

the Internet after passing through the time without
any action.
Fixed IP – Click Yes to use this function and type in a
fixed IP address in the box of Fixed IP Address.

When Static or Dynamic IP is selected, the WAN IP
Network Settings and DNS Server IP Address settings are
available for configuration, and will be used to establish
the WAN connection.
Obtain an IP address automatically – Select this option if
the router is to receive IP configuration information from
a DHCP server.
Router Name – Sets the value of DHCP Option 12,

which is used by some ISPs.
 Domain Name – Sets the value of DHCP Option 15,
which is used by some ISPs.
Specify an IP address – Click this radio button to specify
some data.
IP Address – Type in the IP address.

 Subnet Mask – Type in the subnet mask.
 Gateway IP Address – Type in gateway IP address.
DNS Server IP Address - Type in the primary IP address for
the router if you want to use Static IP mode. If necessary,
type in secondary IP address for necessity in the future.
Such function is available only when ADSL is selected as WAN
Type.
It allows you to verify whether network connection is alive or
not through ARP Detect or Ping Detect.
125