Draytek Vigor2860 User Manual page 820

Interface:[Any]
Address type:[single]
Start ip address:[192.168.1.45]
End/Mask ip address:[0.0.0.0]
Invert Selection:[0]
T e l n e t C o m m
T e l n e t C o m m
This command is used to integrate several IP objects under an IP group profile.
S y n t a x
S y n t a x
object ip grp setdefault
object ip grp INDEX -v
object ip grp INDEX -n NAME
object ip grp INDEX -i INTERFACE
object ip grp INDEX -a IP_OBJ_INDEX
S y n t a x
S y n t a x
Parameter
setdefault
INDEX
-v
-n NAME
-i INTERFACE
-a IP_OBJ_INDEX
E x a m p l
E x a m p
> object ip grp 2 -n First
IP Group Profile 2
Name
Interface:[Any]
Included ip object index:
[0:][0]
[1:][0]
[2:][0]
[3:][0]
[4:][0]
[5:][0]
[6:][0]
806
a n d : o b j e c t i p v 6
a n d : o b j e c t i p v 6
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to return to default settings for all profiles.
It means the index number of the specified group profile.
It means to view the information of the specified group profile.
Example:
It means to define a name for the IP group.
NAME: Type a name with less than 15 characters.
Example:
It means to define an interface for the IP group.
INTERFACE=0, means any
INTERFACE=1, means LAN
INTERFACE=2, means WAN
Example:
It means to specify IP object profiles for the group profile.
Example:
The IP object profiles with index number 1,2,3,4 and 5 will be group
under such profile.
e
l e
:[First]
g r p
g r p
object ip grp 1 -v
object ip grp 8 -n bruce
object ip grp 3 -i 0
:object ip grp 3 -a 1 2 3 4 5
Vigor2860 Series User's Guide