Draytek Vigor2860 User Manual page 816

> msubnet mtu LAN1 1492
> msubnet mtu ?
Usage:
>msubnet mtu <interface> <value>
<interface>: LAN1~LAN6,IP_Routed_Subnet,DMZ
<value>:
e.x: >msubnet mtu LAN1 1492
Current Settings:
LAN1 MTU:
LAN2 MTU:
LAN3 MTU:
LAN4 MTU:
LAN5 MTU:
LAN6 MTU:
DMZ MTU:
IP Routed Subnet MTU: 1500 (Bytes)
T e l n e t C o m m
T e l n e t C o m m
This command is used to create an IP object profile.
S y n t a x
S y n t a x
object ip obj setdefault
object ip obj INDEX -v
object ip obj INDEX -n NAME
object ip obj INDEX -i INTERFACE
object ip obj INDEX -s INVERT
object ip obj INDEX -a TYPE [START_IP] [END/MASK_IP]
S y n t a x
S y n t a x
Parameter
setdefault
INDEX
-v
-n NAME
-i INTERFACE
802
1000 ~ 1508 (Bytes), default: 1500 (Bytes)
a n d : o b j e c t i p o b
a n d : o b j e c t i p o b
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to return to default settings for all profiles.
It means the index number of the specified object profile.
It means to view the information of the specified object profile.
Example:
It means to define a name for the IP object.
NAME: Type a name with less than 15 characters.
Example:
It means to define an interface for the IP object.
INTERFACE=0, means any
INTERFACE=1, means LAN
INTERFACE=3, means WAN
Example:
1492 (Bytes)
1500 (Bytes)
1500 (Bytes)
1500 (Bytes)
1500 (Bytes)
1500 (Bytes)
1500 (Bytes)
j
j
object ip obj 1 -v
object ip obj 9 -n bruce
object ip obj 8 -i 0
Vigor2860 Series User's Guide