Draytek Vigor2860 User Manual page 57

E t h e r n e
E t h e r n e
1. Choose WAN2 as the WAN Interface and choose Ethernet as the Physical Mode. Click
the Next button. The following page will be open for you to specify Internet Access
Type.
2. Click PPPoE as the Internet Access Type. Then click Next to continue.
Available settings are explained as follows:
Item
Service Name
(Optional)
Username
Password
Vigor2860 Series User's Guide
t W A N 2 - P P P o E
t W A N 2 - P P P o E
Description
Enter the description of the specific network service.
Assign a specific valid user name provided by the ISP.
Note: The maximum length of the user name you can set is
63 characters.
Assign a valid password provided by the ISP.
Note: The maximum length of the password you can set is 62
characters.
43