Draytek Vigor2860 User Manual page 855

Interface 7 Ethernet:
Status: DOWN
IP Address: 0.0.0.0
MAC: 00-50-7F-00-00-05
Interface 8 Ethernet:
Status: DOWN
IP Address: 0.0.0.0
MAC: 00-50-7F-00-00-06
Interface 9 Ethernet:
Status: DOWN
IP Address: 0.0.0.0
MAC: 00-50-7F-00-00-07
--- MORE ---
---
>
T e l n e t C o m m
T e l n e t C o m m
This command can set and remove the name for the router when DHCP mode is selected for
WAN.
S y n t a x
S y n t a x
sys name [wan1] [ASCII string]
sys name [wan1] clear
S y n t a x
S y n t a x
Parameter
wan1
ASCII string
E x a m p l
E x a m p
> sys name wan1 drayrouter
> sys name ?
% sys name <wan1/wan2> <ASCII string (max. 20 characters)>
% sys name <wan1/wan2> clear
% Now: wan1 == drayrouter, wan2 ==
Note: Such name can be used to recognize router's identification in SysLog dialog.
Vigor2860 Series User's Guide
['q': Quit, 'Enter': New Lines, 'Space Bar': Next Page]
a n d : s y s n a m e
a n d : s y s n a m e
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to specify WAN interface for assigning a name for it.
It means the name for router. The maximum character that you can
set is 20.
e
l e
Netmask: 0x00000000
Netmask: 0x00000000
Netmask: 0x00000000
841