Draytek Vigor2860 User Manual page 875

value
voip dsp setfxoringl
value
voip dsp setfxoCid
value
voip dsp cidplusdigit
[1/0] [channel] [value]
voip dsp setRingThres
port
value
voip dsp setCidDetGain
tx|rx gain
E x a m p l
E x a m p
> voip dsp countrytone ?
VoIP has been disable. Please enable VoIP first.
Vigor2860 Series User's Guide
It is used to apply FXO country settings.
0: "use system country"
1: "Taiwan"
2: "Germany"
3: "Sweden"
4: "France"
5: "Switzerland"
6: "Holland"
7: "Finland"
8: "Denmark"
9: "UK"
10: "Australia"
12: "Italy"
14: "Red_China"
15: "Singapore"
17: "Spain"
18: "Portugal"
20: "Poland"
21: "Czech"
22: "Hungary"
23: "Slovenia"
25: "Slovakia"
37: "Brasil"
61: "US"
It is used to configure detection ring voltage threshold to apply to
FXO.
Available setting include:
0 : use driver default value
1 : Minimum voltage threshold: 25V
2 : Minimum voltage threshold: 35V
3 : Minimum voltage threshold: 45V
Note: This function is supported only by special mode.
Set FXO detect caller ID type.
It is available only for the model with FXO port.
Set the substitution (0~9) for '+' digit in caller ID.
1 – enable the substitution.
0 – disable the substitution.
channel – 0 (FXS 1) -1 (FXS 2)
value – 0 – 9
Set the threshold for ring signal.
Port setting is "0" only.
Available settings 0-250. Unit is ms.
The time is an approximate value.
Set the gain value of caller ID detected.
Tx gain – Available settings -24 ~ 12. Default is 0.
Rx gain – Available settings -24 ~ 12. Default is -6.
e
l e
861