Draytek Vigor2860 User Manual page 872

voip dsp pstnringfxs [1|2] [on|off]
voip dsp relaydbounce [on|off]
voip dsp setRingPat [ring_pattern_index] [patten_num]
voip dsp setDtmfCidlevel –l [value]
voip dsp setDtmfCidlevel –h [value]
voip dsp setDtmfCidlevel –r 0
voip dsp cidplusdigit [1/0] [channel] [value]
S S y y n n t t a a x x
Parameter
voip dsp countrytone
[channel] [value]
voip dsp dialtonepwr
channel
AbsoluteValue
voip dsp EchoCanceler
type
w_size
nlp
voip dsp cidtype
channel
value
858
D D e e s s c c r r i i p p t t i i o o n n
Description
This command allows users to set the region for the tone settings.
Different regions usually need different tone settings.
Channel – 1 or 2.
Value – displayed as follows:
[2] UK, [3] USA, [4] Denmark, [5] Italy, [6] Germany,
[7] Netherlands, [8] Portugal, [9] Sweden, [10] Australia,
[11] Slovenia, [12] Czech, [13] Slovakia, [14] Hungary,
[15] Switzerland , [16] France , [17] Malta
This setting is used to adjust the loudness of the dial tone. The
smaller the number is, the louder the dial tone is. It is
recommended for you to use the default setting.
Channel - Available channel number: 1 – 2
AbsoluteValue - In -1 dB increments, with 1 corresponding to 6 dBm.
Range - 1 to 30
This command is used to set the type of echo reduction.
0 - Disable the LEC processing.
1 - Cancel using the fixed window.
2 - Cancel using the fixed and moving window.
3 - Cancel using fixed window + Echo Suppressor.
The Line Echo Canceller (LEC) window size is 4, 6, 8 or 16 (ms).
Nlp - Non-linear processing (NLP) for more smooth transitions.
1 - disable
0 - enable
Set the caller ID type for FXS 1 (Channel 1) or FXS 2 (Channel 2).
1 – FXS 1
2 – FXS 2
Each number (1 to 6) represents different type.
1 – FSK_ETSI
2 - FSK_ETSI(UK)
3 - FSK_BELLCORE(US/AU)
4 - DTMF
5 - DTMF(Dk)
6 - DTMF(SE,NL,FIN)
For example :
Vigor2860 Series User's Guide