Draytek Vigor2860 User Manual page 248

Destination
Destination Port
Send to if criteria
matched
234

Start - Type an address as the starting IP for such
profile.

End - Type an address as the ending IP for such profile.
IP Subnet – Define a subnet containing IP address and mask
address.

Network – Type an IP address here.

Mask – Use the drop down list to choose a suitable mask
for the network.
IP Object / IP Group– Use the drop down list to choose a
preconfigured IP object/group.
Any – Any IP can be treated as the destination IP.
IP Range – Define a range of IP address as destination IP
addresses.

Start - Type an address as the starting IP for such
profile.

End - Type an address as the ending IP for such profile.
IP Subnet – Define a subnet containing IP address and mask
address.

Network – Type an IP address here.

Mask – Use the drop down list to choose a suitable mask
for the network.
Domain Name – Specify a domain name as the destination.

Select – Click it to choose an existing domain name
defined in Objects Setting>>String Object.

Delete – Remove current used domain name.

Add – Create a new domain name as the destination.
IP Object / IP Group– Use the drop down list to choose a
preconfigured IP object/group.
Country Object – Use the drop dwon list to choose a
preconfigured object. Then all IPs within that country will
be treated as the destination IP.
Any – Any port number can be treated as the destination
port.
Dest Port Range –

Start - Type the destination port start for the
destination IP.

End - Type the destination port end for the destination
IP. If this field is blank, it means that all the destination
ports will be passed through the WAN interface.
Interface – Use the drop down list to choose a WAN or LAN
interface or VPN profile. Packets match with the above
criteria will be transferred to the interface chosen here.
Gateway IP – Specific gateway is used only when you want
to forward the packets to the desired gateway. Usually,
Default Gateway is selected in default.
Packet Forwarding to WAN via – When you choose WAN
(e.g., WAN1) as the Interface for packet transmission, you
have to specify the way the packet forwarded to. Choose
Force NAT or Force Routing.
Failover to – Check this button to lead the data passing
through specific interface (WAN/LAN/VPN/Route Policy)
Vigor2860 Series User's Guide