Draytek Vigor2860 User Manual page 281

3. After typing the required information, click Next. The settings in the page limit the
wireless station (guest) accessing into Internet but not being allowed to share the LAN
network and VPN connection.
Available settings are explained as follows:
Item
Wireless 2.4GHz Settings
Enable/Disable
SSID
Security Key
Rate Control
Wireless 5GHz Settings
Enable/Disable
Use the same SSID
and Security Key as
above
SSID
Vigor2860 Series User's Guide
Description
Click it to enable or disable settings in this page.
Type the SSID name of this router. (SSID1)
The wireless mode offered by this wizard is WPA2/PSK.
The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated via
802.1x authentication.
Either 8~63 ASCII characters, such as 012345678(or 64
Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
It controls the data transmission rate through wireless
connection.
Upload – Check Enable and type the transmitting rate for
data upload. Default value is 30,000 kbps.
Download – Type the transmitting rate for data download.
Default value is 30,000 kbps.
Click it to enable or disable settings in this page.
Check the box to use the same settings configured above.
Type the SSID name of this router. (SSID2)
267