Under door Aluminum
" drill bit, rivet tool, silicone, caulking gun, spray glue, tin snips.
1
Drill,
/
8
Packaged aluminum, interior trim/carpet, secondary body fasteners
Unpack the under door aluminum panels. They are shaped to fit around the bottom of the door with flanges to
mount to the chassis.
Silicone and rivet the panels in place, it is ok if the flanges do not cover the full width of the chassis tubes. It is
more important that the panel is lined up with the body under the door.
479
www.factoryfive.com
508-291-3443