Factory Five Racing MK4 ROADSTER Assembly Manual page 133

Complete kit

Hide thumbs Also See for MK4 ROADSTER:

Table of Contents

Attach and tighten the locknuts using a ½" wrench and ½" deep socket holding the master cylinder to the pedal

box then repeat for the other master cylinder.

Put the plastic angled inlet adapter with hose clamp on the master cylinders. Use a 6mm socket and ratchet to

tighten the hose clamp.

Tighten all the remaining hardware mounting the pedal box to the chassis.

www.factoryfive.com

508-291-3443