Factory Five Racing MK4 ROADSTER Assembly Manual page 412

The curled under side body edges are not as visible but just taking a little time here to get the lines straight and a
small radius makes for a much nicer finish as well.
The headlight, taillight, fuel cap, turn signal, quick jack, and trunk openings all are covered and do not need the
finish work of the other areas.
Mark the trunk and door hinges before removing the last time so that you can bolt them back together in the
same position that they came off. They may still need minor adjusting during final body installation but this
will get you much closer.
411
www.factoryfive.com 508-291-3443