Factory Five Racing MK4 ROADSTER Assembly Manual page 330

" long rivets to attach the bumpers through the body and into the frame.
1
Use /
8
Once you are happy with the alignment you can set the panel gap and radius the edges. Place a couple of heavy
objects like an alternator or driveshaft on the hood so that it will not move around then center the hood by eye.
An easy way to set the gap is by using a marker. Run a marker around the edge of the panel so that it rubs the
body lip all of the way around. This will leave a line on the panel that may be thicker or thinner in areas.
329
www.factoryfive.com 508-291-3443