Factory Five Racing MK4 ROADSTER Assembly Manual page 237

Route the clutch cable down to the bellhousing. Using zip ties or insulated clips tie the cable safely away from
the headers and the moving steering components. It can be fastened to the engine using the bracket on the cable
to the front lower bolt that holds the starter cable just before it leaves the block or, to the lower engine bay ¾"
tubing.

Make sure that the cable is clear of the hot exhaust header and the steering shaft or the cable may fail
prematurely.
Connect the clutch cable to the bellhousing and the clutch fork.
236
www.factoryfive.com 508-291-3443