Factory Five Racing MK4 ROADSTER Assembly Manual page 200

Run another 60" brake lines from the T fitting over to the right side flexible mount. The line will bend very
easy but be careful not to kink it.
When you are happy with the routing use the small insulated line clips and
Mount the line clips and seal with silicone anywhere you pass into the passenger compartment.
Rear

The ¾" master cylinder is used for front and the " master cylinder is used for the rear brakes.
5
/
8
199
www.factoryfive.com 508-291-3443
" rivets to hold it in place.
3
/
16