Aluminum Door Sill Covers - Factory Five Racing GTM Supercar Assembly Manual

Apply the carpet.
Reinstall the seat belts.
Repeat for the passenger side.

Aluminum Door Sill Covers


⅛" drill bit, drill, silicone, caulking gun.

Aluminum Panel – Door Sill Cover (L, R).
Set the driver side door sill in place so that the flange is on the inside of the car and the front edge of the
aluminum is as close to the front edge of the door opening.
Notice where the panel contacts the body and apply a bead of silicone to the body.
Drill through the top of the panel, body and frame in two rows (one near the flange, one near the outside
edge of the panel) in even increments and rivet the panel in place.
712
www.factoryfive.com 508-291-3443