Factory Five Racing MK4 ROADSTER Assembly Manual page 266

Complete kit

Hide thumbs Also See for MK4 ROADSTER:

Table of Contents

Push the included spring pin through the ratchet mount plates and the ratchet tooth using a pair of channel lock

Slide the 1" nylon spacer onto the end of the anchor bolt.

There are two nylon spacers included. They provide preload on the spring so there is more force

holding the ratchet tooth to the fixed gear and making the release button harder to push. Try using the

1" long spacer first. After the handle is assembled, try the handle and if desired the other ½" spacer can

www.factoryfive.com

508-291-3443