Test fit the two halves of the upper arm mount together. If it is hard to put all of the bolts in the mount holes,
put in as many as you can then use a ½" drill bit through the remaining bolt holes.
Attach the upper link bracket onto the axle using the fine hardware (FFR# 12217 & 12218).
The front attachment of the upper link axle mount attaches to the hole on the flange section of the pumpkin.
This hole has some variance and may need to be drilled out from the bottom side using the mount as a guide.
64
www.factoryfive.com
508-291-3443