Factory Five Racing MK4 ROADSTER Assembly Manual page 43

Install the snap ring on the spring hat so that it holds onto the shock end. Make sure that the slot in the snap
ring and the slot in the spring hat are not aligned.
Pass the shock assembly (with the body of the shock up) through the upper A-arm and attach them to the
lower control arm using the 0.43" spacers that are supplied in the kit.
Check for shock clearance on brake lines, emergency brake cables, brake calipers, frame and axle parts.
Check to make sure that the spring is seated correctly on the shock.
42
www.factoryfive.com 508-291-3443