Factory Five Racing MK4 ROADSTER Assembly Manual page 360

Latch the door latch onto the striker and close the door. Adjust the striker if needed to fit the latch to the door
cut out. You can also use the door latch spacers to help with this alignment.
" holes for the door latch.
With the door lined up and the striker in place, mark and drill the /
1 8
Lubricate the moving parts of the latch using Lithium or silicone grease. This will make the latches easier to
use and prevent any binding.
359
www.factoryfive.com 508-291-3443