Factory Five Racing MK4 ROADSTER Assembly Manual page 118

Complete kit

Hide thumbs Also See for MK4 ROADSTER:

Table of Contents

Rivet the firewall in position on the chassis.

The Footbox front for the Wilwood Pedal box is packaged with the pedalbox in the kit. The one that is

shipped on the chassis is for the OEM Mustang pedalbox.

Mark, drill, and rivet in place the driver's side footbox front panel, leave the lower section that attaches to the

¾" tube un-siliconed and un-riveted for the inside wall to slip underneath later.

www.factoryfive.com

508-291-3443