Factory Five Racing MK4 ROADSTER Assembly Manual page 295

" below the top edge
Line the dash up with the hoop on the chassis. The corners of the dash support tube are /
3 16
of the dash. The tube will be lower as it goes to the middle.
" drill bit then drill
Drill for the dash mounting screws (5 evenly spread) through the dash and chassis with a /
1 8
" bit and screw the dash to the chassis.
3
back through the dash only with a /
16
Push the ends of the dash behind the top of the door hinge and screw through the hinge into the dash end.
294
www.factoryfive.com 508-291-3443