Factory Five Racing MK4 ROADSTER Assembly Manual page 195

Lay out the various lengths of brake line so you can see what you have to work with. Like the fuel lines, there
are many ways to run these lines but you must be very careful to keep them protected from moving parts, heat,
or being to close to the bottom of the car.

Which side you run down may depend on where you are hooking up to your fuel rail, carburetor, or
pressure regulator. We usually run the fuel lines on the passenger side of the car and the brake lines on
the driver side of the car.
The laser cut stainless brackets from the front brake assembly attach to the chassis right behind the front upper
control arms. Drill and rivet these in place using two
" rivets.
/
3 16
194
www.factoryfive.com 508-291-3443