Data Rate (H-Tile): Displays the XCVR type and data rate of each channel.
Figure 32.
QSFP and SFP+ Data Rate
Tx (Mbps) and Rx (Mbps): Show the number of bytes of data analyzed per second.
6.3.11 The CFP4 Tab
Figure 33.
The CFP4 Tab
The following sections describe controls on the CFP4 tab.
Status
The Status control displays the following status information during the loopback test:
®
®
Intel
Stratix
10 GX Transceiver Signal Integrity Development Kit User Guide
78
6 Board Test System