Installing The Intel Fpga Download Cable Driver - Intel Stratix 10 GX User Manual

1. Download the development kit installer from the
Integrity Development Kit
2. Unzip the Intel Stratix 10 Transceiver Signal Integrity Development Kit installer
package.
3. The installer package creates the development kit directory structure shown in the
figure below.
Figure 1. Development Kit Directory Structure
The table below lists the file directory names and a description of their contents
Table 1. Installed Development Kit Directory Structure
File Directory Name
board_design_files
demos
documents
examples
factory_recovery

2.3 Installing the Intel FPGA Download Cable Driver

The Intel Stratix 10 GX Transceiver Signal Integrity Development Kit includes
embedded Intel FPGA Download Cable circuits for FPGA and MAX
However, for the host computer and board to communicate, you must install the Intel
FPGA Download Cable driver on the host computer.
Installation instructions for the Intel FPGA Download Cable driver for your operating
system are available on the Intel website.
On the Intel website, navigate to the
locate the table entry for your configuration and click the link to access the
instructions.
® ®
Intel Stratix 10 GX Transceiver Signal Integrity Development Kit User Guide
6
Stratix 10 GX Transceiver Signal
link on the Intel website.
<package rootdir>
board_design_files
demos
documents
examples
factory_recovery
Description of Directory Contents
Contains schematics, layout, assembly and bill of material
board design files. Use these files as a starting point for a
new prototype board design
Contains demonstration applications when available
Contains the development kit documentation
Contains the sample design files for the development kit
Contains the original data programmed onto the board
before shipment. Use this data to restore the board with its
original factory contents.
Cable and Adapter Drivers Information
2 Getting Started
®
V programming.
link to