User-Defined Dip Switch; User-Defined Leds - Intel Stratix 10 GX User Manual

Board Reference
S11
S12
S13

4.7.2 User-Defined DIP Switch

Board reference SW4 and SW5 are two 4-pin DIP switches. The switches are user-
defined and are provides additional FPGA input control. When the switch is in the
OPEN position, a logic 1 is selected. When the switch is in the CLOSED or ON position,
a logic 0 is selected. There is no board-specific function for these switches.
The table below lists the schematic signal names of each DIP switch and their
corresponding Intel Stratix 10 GX FPGA pin numbers.
Table 9. User-Defined Switches
Board Reference
SW5.4
SW5.3
SW5.2
SW5.1
SW4.4
SW4.3
SW4.2
SW4.1

4.7.3 User-Defined LEDs

The development board includes 8 user-defined LEDs. Board references D12 through
D19 are user LEDs that allow status and debugging signals to be driven to the LEDs
from the designs loaded into the Intel Stratix 10 GX FPGA device. The LEDs illuminate
when a logic 0 is driven and turns off when a logic 1 is driven. There is no board-
specific function for these LEDs.
The table below lists the user-defined schematic signal names and their corresponding
Intel Stratix 10 GX FPGA device pin numbers.
Table 10. User-Defined LEDs
Board Reference
D12
D13
D14
D15
® ®
Intel Stratix 10 GX Transceiver Signal Integrity Development Kit User Guide
30
Schematic Signal Name
PGM_CONFIG
MAX_RESETn
CPU_RESETn
Schematic Signal Name
USER_DIP0
USER_DIP1
USER_DIP2
USER_DIP3
USER_DIP4
USER_DIP5
USER_DIP6
S10_UNLOCK
Schematic Signal Name
USER_LED0
USER_LED1
USER_LED2
USER_LED3
Description
System pushbutton
System pushbutton
System pushbutton
Intel Stratix 10 GX Device Pin
AV20
AV21
AT19
BE19
BB18
BC18
BD18
BG18
Intel Stratix 10 Device Pin Number
BC21
BC20
BA20
BA21
4 Board Components
Intel Stratix 10 Device
Pin Number
N/A
N/A
AW10
Number
continued...