The Flash Tab - Intel Stratix 10 GX User Manual

Figure 18. The GPIO Tab
The following sections describe the controls on the GPIO tab.
Character LCD
The Character LCD controls allow you to display text strings on the character LCD on
your board. Type text in the text boxes and then click Display. If you exceed the 16
character display limit on either line, a warning message appears.
User DIP Swicthes
The read-only User DIP switches control displays the current positions of the switches
in the user DIP switch bank (SW2 and SW6). Change the switches on the board to see
the graphical display change.
User LEDs
The User LEDs control displays the current state of the user LEDs. Toggle the LED
buttons to turn the board LEDs on and off.

6.3.4 The Flash Tab

The Flash tab allows you to read and write flash memory on your board.
® ®
Intel Stratix 10 GX Transceiver Signal Integrity Development Kit User Guide
52
6 Board Test System