Table of Contents
Advertisement
Configuration Commands
challenge
Syntax
challenge always
no challenge
Context
config>router>l2tp>group
Description
This command configures the use of challenge-response authentication.
The no form of the command reverts to the default never value.
Parameters
always — Specifies when challenge-response is to be used for the authentication of the tunnels in this
destruct-timeout
Syntax
destruct-timeout destruct-timeout
no destruct-timeout
Context
config>router>l2tp>group
config>router>l2tp>group>tunnel
Description
This command configures the period of time that the data of a disconnected tunnel will persist before
being removed.
The no form of the command removes the value from the configuration.
Default
no destruct-timeout
Parameters
destruct-timeout — [Specifies the automatic removal of dynamic L2TP sessions, in seconds, that are
Page 90
Default
no avp-hiding
Values
sensitive — AVP hiding is used only for sensitive information (such as username/
password).
always — AVP hiding is always used.
L2TP group.
Default
no challenge
Values
always
no longer active.
Default
no destruct-timeout
Values
60 — 86400
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
