Table of Contents
Advertisement
Configuration Commands
General Filter Entry Commands
entry
Syntax
entry entry-id [time-range time-range-name] [create]
no entry entry-id
Context
config>filter>dhcp-filter
config>filter>ip-filter
config>filter>ipv6-filter
config>filter>mac-filter
Description
This command creates or edits an IP or MAC filter entry. Multiple entries can be created using unique
entry-id numbers within the filter. The implementation exits the filter on the first match found and
executes the actions in accordance with the accompanying action command. For this reason, entries
must be sequenced correctly from most to least explicit.
An entry may not have any match criteria defined (in which case, everything matches) but must have
at least the keyword action for it to be considered complete. Entries without the action keyword will
be considered incomplete and hence will be rendered inactive.
The no form of the command removes the specified entry from the IP or MAC filter. Entries removed
from the IP or MAC filter are ediately removed from all services or network ports where that filter is
applied.
Default
none
Parameters
entry-id — An entry-id uniquely identifies a match criteria and the corresponding action. It is
time-range time-range-name — Specifies the time range name to be associated with this filter entry
create — Keyword required when first creating the configuration context. Once the context is
Page 370
recommended that multiple entries be given entry-ids in staggered increments. This allows users
to insert a new entry in an existing policy without requiring renumbering of all the existing
entries.
Values
1 — 65535
up to 32 characters in length. The time-range name must already exist in the config>cron
context.
created, one can navigate into the context without the create keyword.
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
