Table of Contents
Advertisement
Configuration Commands
sgt-qos
Syntax
sgt-qos
Context
config>router
Description
This command configures DSCP/Dot1p re-marking for self-generated traffic.
application
Syntax
application dscp-app-name dscp {dscp-value |dscp-name}
application dot1p-app-name dot1p dot1p-priority
no application {dscp-app-name|dot1p-app-name}
Context
config>router>sgt-qos
Description
This command configures DSCP/Dot1p re-marking for applications.
Parameters
dscp-app-name — Specifies the DSCP application name.
dscp-value — Specifies the DSCP value
dscp-name — Specifies the DSCP name.
dot1p-priority — Specifies the Dot1p priority.
dot1p-app-name — Specifies the Dot1p application name.
dscp
Syntax
dscp dscp-name fc fc-name
no dscp dscp-name
Context
config>router>sgt-qos
Page 80
When this option is specified, the addresses configured are exclusively used for services and
cannot be assigned to network ports.
bgp, cflowd, dhcp, dns, ftp, icmp, igmp, ldp, mld, msdp, ndis, ntp, ospf, pim, radius, rip, rsvp,
snmp, snmp-notification, srrp, ssh, syslog, tacplus, telnet, tftp, traceroute, vrrp
Values
0 — 63
none, be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2, af11, af12,
af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13, cp15, cp17, cp19, cp21,
cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43, cp44, cp45, cp47, cp49,
cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58, cp59, cp60, cp61, cp62, cp63
Values
none, 0 — 7
Values
arp, isis, pppoe
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
