Table of Contents
Advertisement
ieee-address-mask — This 48-bit mask can be configured using:
ssap
Syntax
ssap ssap-value [ssap-mask]
no ssap
Context
config>filter>mac-filter>entry
Description
This command configures an Ethernet 802.2 LLC SSAP value or range for a MAC filter match
criterion.
This is a one-byte field that is part of the 802.2 LLC header of the IEEE 802.3 Ethernet Frame.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and may not be part of the
same match criteria.
exclusive based on the frame format.
The no form of the command removes the ssap match criterion.
Default
no ssap
Parameters
ssap-value — The 8-bit ssap match criteria value in hex.
ssap-mask — This is optional and may be used when specifying a range of ssap values to use as the
7450 ESS OS Router Configuration Guide
Format Style
Decimal
Hexadecimal
Binary
To configure so that all packets with a source MAC OUI value of 00-03-FA are subject to a
match condition then the entry should be specified as: 003FA000000 0xFFFFFF000000
Default
0xFFFFFFFFFFFF (exact match)
Values
0x00000000000000 — 0xFFFFFFFFFFFF
MAC Match Criteria Exclusivity Rules on page 322
Values
0x00 — 0xFF
match criteria.
Format Syntax
DDDDDDDDDDDDDD
0xHHHHHHHHHHHH
0bBBBBBBB...B
Filter Policies
Example
281474959933440
0x0FFFFF000000
0b11110000...B
describes fields that are
Page 391
Advertisement
Table of Contents
