Table of Contents
Advertisement
Configuration Commands
dsap
Syntax
dsap dsap-value [mask]
no dsap
Context
config>filter>mac-filter>entry>match
Description
Configures an Ethernet 802.2 LLC DSAP value or range for a MAC filter match criterion.
This is a one-byte field that is part of the 802.2 LLC header of the IEEE 802.3 Ethernet Frame.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and may not be part of the
same match criteria.
exclusive based on the frame format.
Use the no form of the command to remove the dsap value as the match criterion.
Default
no dsap
Parameters
dsap-value — The 8-bit dsap match criteria value in hexadecimal.
mask — This is optional and may be used when specifying a range of dsap values to use as the match
Page 386
MAC Match Criteria Exclusivity Rules on page 322
Values
0x00 — 0xFF (hex)
criteria.
This 8 bit mask can be configured using the following formats:
Format Style
Decimal
Hexadecimal
Binary
Default
FF (hex) (exact match)
Values
0x00 — 0xFF
Format Syntax
DDD
0xHH
0bBBBBBBBB
7450 ESS OS Router Configuration Guide
describes fields that are
Example
240
0xF0
0b11110000
Advertisement
Table of Contents
