Table of Contents
Advertisement
Configuration Commands
Description
This command specifies what to do in case the system receives a L2TP responsefrom another address
than the one the request was sent to.
Parameters
accept — Specifies that this system accepts any source IP address change of received L2TP control
ignore — Specifiesthat this system ignores any source IP address change of received L2TP control
reject — Specifies that this system rejects any source IP address change of received L2TP control
receive-window-size
Syntax
receive-window-size [4..1024]
no receive-window-size
Context
config>router>l2tp
Description
This command configures the L2TP receive window size.
session-limit
Syntax
session-limit session-limit
no session-limit
Context
config>router>l2tp
Description
This command configures the L2TP session limit of this router.
Parameters
session-limit — Specifies the session limit.
Page 88
messages related to a locally originated tunnel in the state waitReply and rejectsany peer address
change for other tunnels; in case the new peer IPaddress is accepted, it is learned and used as
destination addressin subsequent L2TP messages.
messages, does not learn anynew peer IP address and does not change the destination address
insubsequent L2TP messages.
messages and drops those messages.
Values
1..131071
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
