Table of Contents
Advertisement
Configuration Commands
shutdown
Syntax
[no] shutdown
Context
config>filter>log
config>filter>log>summary
config>filter>redirect-policy
config>filter>redirect-policy>destination
Administratively enables/disabled (AdminUp/AdminDown) an entity. Downing an entity does not
change, reset or remove any configuration settings or statistics. Many objects must be shutdown
before they may be deleted.
The shutdown command administratively downs an entity. Administratively downing an entity
changes the operational state of the entity to down and the operational state of any entities contained
within the administratively down entity.
Unlike other commands and parameters where the default state will not be indicated in the
configuration file, shutdown and no shutdown are always indicated in system generated
configuration files.
The no form of the command puts an entity into the administratively enabled state.
Default
no shutdown
summary
Syntax
summary
Context
config>filter>log
Description
This command enables the context to configure log summarization. These settings will only be taken
into account when syslog is the log destination. Note that summary settings will only be taken into
account in case the log destination is syslog.
Parameters
none
summary-crit
Syntax
summary-crit dst-addr
summary-crit src-addr
no summary-crit
Context
config>filter>log>summary
Description
This command defines the the key of the index of the minitable. If key information is changed while
summary is in no shutdown, the filter summary minitable is flushed and recreated with different key
information. Log packets received during the reconfiguration time will be handled as if summary was
not active.
The no form of the command reverts to the default parameter.
Page 366
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
