Table of Contents
Advertisement
Description
This command associates an IP filter policy with an IP interface.
Filter policies control packet forwarding and dropping based on IP match criteria.
The ip-filter-id must have been pre-configured before this filter command is executed. If the filter ID
does not exist, an error occurs.
Only one filter ID can be specified.
The no form of the command removes the filter policy association with the IP interface.
Default
No filter is specified.
Parameters
ip ip-filter-id — The filter name acts as the ID for the IP filter policy expressed as a decimal integer.
7450 ESS OS Router Configuration Guide
The filter policy must already exist within the config>filter>ip context.
Values
1 — 16384
IP Router Configuration
Page 119
Advertisement
Table of Contents
