Table of Contents
Advertisement
Show Commands
rtr-advertisement
Syntax
rtr-advertisement [interface interface-name]
rtr-advertisement [conflicts]
Context
show>router
Description
This command displays router advertisement information.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
interface-name — Maximum 32 characters.
Output
Router-Advertisement Table Output — The following table describes the output fields for router-
advertisement.
Rtr Advertisement
Tx/Last Sent
Nbr Solicitation
Tx
Nbr Advertisement
Tx
Rtr Advertisement
Rx
Nbr Advertisement
Rx
Max Advert Inter-
val
Managed Config
Reachable Time
Retransmit Time
Link MTU
Rtr Solicitation
Rx
Page 160
Label
The number of router advertisements sent and time since they were
sent.
The number of neighbor solicitations sent and time since they were
sent.
The number of neighbor advertisements sent and time since they were
sent.
The number of router advertisements received and time since they
were received.
The number of neighbor advertisements received and time since they
were received.
The maximum interval between sending router advertisement mes-
sages.
True — Indicates that DHCPv6 has been configured.
False — Indicates that DHCPv6 is not available for address config-
uration.
The time, in milliseconds, that a node assumes a neighbor is reachable
after receiving a reachability confirmation.
The time, in milliseconds, between retransmitted neighbor solicitation
messages.
The MTU number the nodes use for sending packets on the link.
The number of router solicitations received and time since they were
received.
Description
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
