Table of Contents
Advertisement
Show Commands
status
Syntax
status
Context
show>router
Description
This command displays the router status.
Output
Router Status Output — The following table describes the output fields for router status
information.
Router
OSPF
RIP
ISIS
MPLS
RSVP
LDP
Max Routes
Total Routes
ECMP Max Routes
service-id
Triggered Poli-
cies
Sample Output
Note that there are multiple instances of OSPF. OSPF-0 is persistent. OSPF-1 through OSPF-31 are
present when that particular OSPF instance is configured.
*A:Performance# show router status
================================================================
Router Status (Router: Base)
================================================================
----------------------------------------------------------------
Router
OSPFv2-0
Page 170
Label
The administrative and operational states for the router.
The administrative and operational states for the OSPF protocol.
The administrative and operational states for the RIP protocol.
The administrative and operational states for the IS-IS protocol.
The administrative and operational states for the MPLS protocol.
The administrative and operational states for the RSVP protocol.
The administrative and operational states for the LDP protocol.
The maximum number of routes configured for the system.
The total number of routes in the route table.
The number of ECMP routes configured for path sharing.
state — Current single SFM state
start
respected the hold-off time
interval — How long the vRtr remained or is in overload
No — Triggered route policy re-evaluation is disabled.
Yes — Triggered route policy re-evaluation is enabled.
Admin State
Up
Up
Description
— Last time this vRtr went into overload, after having
Oper State
Up
Up
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
