Table of Contents
Advertisement
Configuration Commands
Parameters
transmit-interval — Sets the transmit interval, in milliseconds, for the BFD session.
receive receive-interval — Sets the receive interval, in milliseconds, for the BFD session.
multiplier multiplier — Set the multiplier for the BFD session.
echo-receive echo-interval — Sets the minimum echo receive interval, in milliseconds, for the
cflowd
Syntax
cflowd {acl | interface}
no cflowd
Context
config>router>interface
Description
This command enables cflowd to collect traffic flow samples through a router for analysis.
cdflowd is used for network planning and traffic engineering, capacity planning, security, and
application, as well as user profiling, performance monitoring, and SLA measurement. When cflowd
is enabled at the interface level, all IP packets forwarded by the interface are subjected to analysis
according to the cflowd configuration.
Default
no cflowd
Parameters
acl — cflowd policy associated with a filter.
interface — cflowd policy associated with an IP interface.
cpu-protection
Syntax
cpu-protection policy-id
no cpu-protection
Context
config>router>interface
Description
This command assigns an existing CPU protection policy for the interface. The CPU protection
policies are configured in the config>sys>security>cpu-protection>policy cpu-protection-policy-id
context.
Page 106
Values
10 — 100000
Default
100
Values
10 — 100000
Default
100
Values
3— 20
Default
3
session.
Values
100 — 100000
Default
100
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
