Table of Contents
Advertisement
Modifying an IP Filter Policy
To access a specific IP filter, you must specify the filter ID. Use the
remove the command parameters or return the parameter to the default setting.
Example
The following output displays the modified IP filter output:
A:ALA-7>config>filter# info
----------------------------------------------
...
7450 ESS OS Router Configuration Guide
:
config>filter>ip-filter# description "New IP filter info"
config>filter>ip-filter# entry 2 create
config>filter>ip-filter>entry$ description "new entry"
config>filter>ip-filter>entry# action drop
config>filter>ip-filter>entry# match dst-ip 10.10.10.104/32
config>filter>ip-filter>entry# exit
config>filter>ip-filter#
ip-filter 11 create
description "New IP filter info"
scope exclusive
entry 1 create
match
dst-ip 10.10.10.91/24
src-ip 10.10.10.106/24
exit
action drop
exit
entry 2 create
description "new entry"
match
dst-ip 10.10.10.104/32
exit
action drop
exit
entry 10 create
match
dst-ip 10.10.10.91/24
src-ip 10.10.0.100/24
exit
action drop
exit
entry 15 create
description "no-91"
match
dst-ip 10.10.10.91/24
src-ip 10.10.10.103/24
exit
action forward
exit
entry 30 create
match
Filter Policies
form of the command to
no
Page 347
Advertisement
Table of Contents
