Table of Contents
Advertisement
Show Commands
Clear Commands
ip
Syntax
ip ip-filter-id [entry entry-id] [ingress | egress]
Context
clear>filter
Description
Clears the counters associated with the IP filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default
clears all counters associated with the IP filter policy entries.
Parameters
ip-filter-id — The IP filter policy ID.
entry-id — Specifies that only the counters associated with the specified filter policy entry will be
ingress — Specifies to only clear the ingress counters.
egress — Specifies to only clear the egress counters.
log
Syntax
log log-id
Context
clear
Description
Clears the contents of a memory or file based filter log.
This command has no effect on a syslog based filter log.
Parameters
log-id — The filter log ID destination expressed as a decimal integer.
mac
Syntax
mac mac-filter-id [entry entry-id] [ingress | egress]
Context
clear>filter
Clears the counters associated with the MAC filter policy.
Page 420
Values
1 — 65535
cleared.
Values
1 — 65535
Values
101 — 199
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
