Table of Contents
Advertisement
interface
Syntax
interface [{[ip-address | ip-int-name] [statistics] [detail] [family]} | [summary] | [exclude-
services]
interface family [detail]]
Context
show>router
Description
This command displays the router IP interface table sorted by interface index.
Parameters
ip-address — Only displays the interface information associated with the specified IP address.
ipv4-address
ip-int-name — Only displays the interface information associated with the specified IP interface name.
detail — Displays detailed IP interface information.
statistics — Displays packet statistics for an interface on the router.
summary — Displays summary IP interface information for the router.
exclude-services — Displays IP interface information, excluding IP interfaces configured for customer
family — Specifies the router IP interface family to display.
Output
Standard IP Interface Output — The following table describes the standard output fields for an IP
interface.
Interface-Name
Type
IP-Address
Adm
Opr
7450 ESS OS Router Configuration Guide
a.b.c.d (host bits must be 0)
services. Only core network IP interfaces are displayed.
Values
ipv4 — Displays only those peers that have the IPv4 family enabled.
Label
The IP interface name.
n/a — No IP address has been assigned to the IP interface, so the IP
address type is not applicable.
Pri — The IP address for the IP interface is the Primary address on
the IP interface.
Sec — The IP address for the IP interface is a secondary address on
the IP interface.
The IP address and subnet mask length of the IP interface.
n/a
Down — The IP interface is administratively disabled.
Up — The IP interface is administratively enabled.
Down — The IP interface is operationally disabled.
Up — The IP interface is operationally disabled.
Description
— Indicates no IP address has been assigned to the IP interface.
IP Router Configuration
Page 145
Advertisement
Table of Contents
